SYSCAD - CAD for metal construction Start  back  next

Blocking / plastics / wood blocks

 Attachment details > Blocking / plastics / wood blocks

Toolbar: SYSCAD Attachment details -> Klotz Kunststoffprofil kgl_s1 ... kgl_s8

Settings and defaults under: SYSCAD-Variable / Attachment-Details / Support block

Ribbon: SYSCAD Attachment -> Tools -> Klotz Kunststoffprofil kgl_s1 ... kgl_s8

Settings and defaults under: SYSCAD-Variable / Attachment-Details / Support block 1-8

 

 

Settings and defaults under: SYSCAD-Variable / Denomination / ARX-legend English / Support block

These commands are used to create rectangular blocks, plastic profiles and wooden blocks.

From version 2012, the blocks are intelligent SYSCAD objects and can be changed by double-clicking.

You can set the contour layer and whether the block should be rotated when it is inserted in the SYSCAD variable / Attachment details / Support block.

 

Define your blocks analogue to the RECTANGLE command in AutoCAD using two points or by entering the width times the height. This block can then be rotated.

 

Command:

First Point or <RETURN> for input width x height b_enter

 

dialog-klotz

 

 

 

The following types are available: without (without line cross), standard (with line cross) and 8 other user-definable blocks with any hatching pattern. Definable in the SYSCAD-Variable / Attachment-Details / Support block 1-8.

You control the labelling in the SYSCAD-Variable / Denomination / ARX-legend English / Support block.

 

kap10_2