Glass thickness

Toolbar: SYSCAD Generating Sections -> SYSFLY-Filling ->
Ribbon: SYSCAD Gener. Sections -> Filling ->

Command:"Change glass"

This option can be used to subsequently change existing infill thicknesses individually or for the entire view.

If, for example, different infill thicknesses are required for a door with transom, only one glass thickness can be specified for the entire element using the "Door" FILLING programme.

The transom profile is defined with the programme T-Bar programme and the glass is automatically divided.

You now have the option of changing the infill thickness of one of the two panes. After calling up the programme with the "Select objects"command , touch the polyline (WHC_Glas layer) or select the area to be changed in the window or cross.

Only elements on the WHC_Glas layer are changed.

For the "Filling thickness e.g. (18mm-47mm)"enquiry , a new value can be entered using the keyboard or clicked in the on-screen menu. You will then receive a message about the number of fillings that have been changed, e.g: "1 filling changed".