T-Bar

T-Bar:

A prerequisite to add T-bars is an existing filling in the selected field (e.g. window or door). Otherwise you will get the error message " no vent profile found".

The program determines the thickness of the glass filling and checks at the same time, whether the T-bar can be glazed.

In case T-bars cannot be glassed with the glass thickness determined in the filling, the message "filling thickness not realizable" is displayed.

The menu point OPTIONS "Glass thickness" offers the possibility to correct the glass thickness of the filling.

Carry out application and program similar to the description in T/M-PROFILES .

Special T-BAR:

Toolbox: SYSCAD GENERATING SECTIONS and

To insert one or more special T-bars, use the function "special T-Bar edit mode" to select the filling. To draw the T-bars use the command T/M PROFILES. All functions like CORNER CONNECTION or PROFILE ADAPTATION are available. Click on "close special T-bar edit mode" . The fillings are adapted automatically to the changed profile situation.

If you use the special sash bar mode with curved profiles, you must set the fillings manually before exiting the mode.