Corner connection

 Top  Previous  Next

Toolbar: SYSCAD Generating sections -> SYSFLY-Profile alter -> eckvb_16

 

Ribbon: SYSCAD Gener. Sections -> Options -> eckvb_16

 

 

The option corner connection is used to modify FRAME / T/M-PROFILES or MULLION / TRANSOM connections.

Activate the command and select the two profiles to be modified. SYSCAD® displays the possible versions that can be clicked through and confirmed with  RETURN or via a right mouse click.

Please note: Only use this command for real corner connections of two profiles. (see figure below)

 

kap5_26