Modified dimension for cut list

 Top  Previous  Next

Toolbar: SYSCAD Generating sections -> SYSFLY-Profile alter -> Extend / shorten main profiles / print cover profiles

 

Ribbon: SYSCAD Gener. Sections -> FLYOUT Options -> Extend / shorten main profiles / print cover profiles

 

 

This option is used to extend or shorten profiles in the cut list. The elevation and selected joints/connections are not affected.

The main profiles of the elevation (frames, T/M-profiles, mullions and transoms) can be calculated with a modified dimension in the cut list. In addition to the determined cut there is an extra calculated. Basis for calculation is the standard connection.
See example:

 

Korrekturmass für Stückliste

The statical transom/mullion profile is calculated in addition to the standard cut (22 mm leg) with 37.5 mm longer. It is not to be seen in the elevation yet.

Proceed as follows: Select the respective profile and press the right mouse button. Choose "Modified dimension for cut list" from the context menu.

 

Alternatively: Choose directly the command: "Main profile / press. plate / face cap change length". Extend / shorten main profiles / print cover profiles and then your desired profile.