Concrete/Wall/User defined hatch

Toolbar: SYSCAD Attachment details -> SYSFLY-Concrete -> ...

Ribbon: SYSCAD Attachment -> Concrete -> ...

Draws a polyline with or without bevel with hatching to represent a concrete or wall structure

Define two diagonal points (via OFANG) or by means of relative coordinates (@) to draw the polyline.

Command:

First corner or <RETURN> for non rectangular object: (P1)

Second corner: (P2)

Hatch style <ANSI33>

Factor: <5>

The contour layer, hatching layer, hatching pattern, spacing and chamfer spacing can  be changed in the SYSCAD-Varibale / Attachment-Details dialogue box . Either for the respective material such as wall, concrete, plaster and window sill or for the 8 user-defined contours with hatching. You  set  these user-defined hatchings in the SYSCAD-Variable / Attachment-Details / Hatch. You control the labelling in the SYSCAD-Variable / Denomination / ARX-legend English / Contour 1-8

Command:

First corner or <RETURN> for non rectangular object:

First point: (P1)

to point or "RETURN" for end:(P2)

to point or "RETURN" for end:(P3)

to point or "RETURN" for end:(P4)

to point or "RETURN" for end:(P5)

to point or "RETURN" for end:

Hatch style <ANSI33>

Factor: <5>

Use the command draw tolerance lines to draw lines on a layer to be specified at the specified distance inside and/or outside of the selected object.