Exclude profiles from calculation

 Top  Previous  Next

 

Toolbar: SYSCAD Generating sections -> SYSFLY List -> Profile von der Berechnung ausschließen

 

Ribbon: SYSCAD Gener. Sections -> Cut List -> Profile von der Berechnung ausschließen

 

 

 

This command Profile von der Berechnung ausschließen is used to exclude the selected profiles from the cut list calculation. The profiles are marked by a red cross. Connection elements / gaskets are calculated all the same.

 

The command can be useful with profiles that exist in 2 elevations, such as corner profiles, but should only be calculated once.

 

The command Profile in die Berechnung aufnehmen is used to calculate the profiles again.