Material layer

 Top  Previous  Next

Toolbar: SYSFLY-Layer material -> Layer Beton Layer Mauer Layer Putz Layer Fensterbank Layer AluminiumLayer Stahl Layer Edelstahl Layer Kunststoff Layer Holz Layer 1 Layer 2 Layer 3 Layer 4 Layer 5 Layer 6 Layer 7 Layer 8

Settings and defaults under: SYSCAD-Variable / Attachment-Details

Ribbon: Layer ->  Material Layer -> Layer Beton Layer Mauer Layer Putz Layer Fensterbank Layer AluminiumLayer Stahl Layer Edelstahl Layer Kunststoff Layer Holz Layer 1 Layer 2 Layer 3 Layer 4 Layer 5 Layer 6 Layer 7 Layer 8

 

 

Command: "Layer concrete" Layer Concrete Switches the layer defined in the SYSCAD-Variable / Attachment-Details / Concrete / Layer (e.g. layer BETON) to the current drawing layer.

Command: "Layer wall" Layer Wall Switches the layer defined in the SYSCAD-Variable / Attachment-Details / Wall / Layer (e.g. layer MAUER) to the current drawing layer.

Command: "Layer plaster" Layer Plaster Switches the layer defined in the SYSCAD-Variable / Attachment-Details / Plaster / Layer (e.g. layer PUTZ) to the current drawing layer.

Command: "Layer window sill" Layer window sill Switches the layer defined in the SYSCAD-Variable / Attachment-Details / Windows sill / Layer (e.g. layer FBANK) to the current drawing layer.

Command: "Layer Aluminium" Layer Aluminium Switches the layer defined in the SYSCAD-Variable / Attachment-Details / Aluminium / Layer (e.g. layer SYS_AL_CONT) to the current drawing layer.

Command: "Layer steel" Layer Steel Switches the layer defined in the SYSCAD-Variable / Attachment-Details / Steel / Layer (e.g. layer SYS_ST_CONT) to the current drawing layer.

Command: "Layer Stainless Steel" Layer Stainless Steel Switches the layer defined in the SYSCAD-Variable / Attachment-Details / Stainless steel / Layer (e.g. layer SYS_ST_CONT) to the current drawing layer.

Command: "Layer plastic" Layer Plastic Switches the layer defined in the SYSCAD-Variable / Attachment-Details / PVC profile / Layer (e.g. layer KPROFIL) to the current drawing layer.

Command: "Layer wood" Layer Wood Switches the layer defined in the SYSCAD-Variable / Attachment-Details / wood / Layer (e.g. layer SYS_WO_CONT) to the current drawing layer.

Command: "Layer contou 1 - Layer contour 8 Layer 1 Layer 2 Layer 3 Layer 4 Layer 5 Layer 6 Layer 7 Layer 8Layer 1 Layer 2 Layer 3 Layer 4 Layer 5 Layer 6 Layer 7 Layer 8 Lets you switch one of 8 layers defined in the SYSCAD-Variable / Attachment-Details / Hatch / Hatch 1-8 to the current drawing layer.