SYSCAD - CAD for metal construction

Sealing tape / Gasking cord

Attachment details > Sealing tape

Variant 1:

Toolbar: SYSCAD Attachment details ->

Ribbon: SYSCAD-Attachment -> Tools ->

Command: "Sealing tape"

Draws a sealing tape in vertical or horizontal direction using diagonal points.

kap8_3

Command: Sealing tape

First corner: (P1)

Second corner: (P2)

Variant 2:

Toolbox SYSCAD Attachment details:

Ribbon: SYSCAD-Attachment -> Tools ->

Command: "Sealing tape rectangular"

Draws a sealing tape with 2 points in any order. Define the direction with the left mouse button. The depth can be changed with "t".

kap8_19

Command: First point

Point2 or for entering width x height: Second point

point for direction / depth or for OK: left mouse button for change sides, T for altering the depth, right mouse button or to draw the sealing tape

The properties like layers of contour and hatching, type of hatching, distance etc. are defined in the dialog box SYSCAD-Variable / Attachment-Details / Sealing tape.

Variant 3:

Toolbox: SYSCAD Attachment details ->

Ribbon: SYSCAD-Attachment -> Tools ->

Command: "Backfilling"

Draws a backing cord with entering the diameter and an insertion point.

Hinterfüllung

Command:

Diameter <3> enter dimension or confirm with

Insertion point left mouse button for insertion point

The properties like layers of contour and hatching, type of hatching, distance etc. are defined in the dialog box SYSCAD-Variable / Attachment-Details / Gasket cord.