LOGIKAL interface

Please find further information about the calculation program LOGIKAL at www.orgadata-ag.de

•LogiKal Position

With this command you could insert a position from LogiKal into your drawing. Choose the position from your order dialog and place the elevation into your drawing.

The path to your LogiKal - Installation should be defined in the SYSCAD-Variable / List / LogiKal

•LogiKal Update Position

With this command you get the up-to-date elevation of an already inserted elevation.

•LogiKal edit position

With this command you are able to edit the position directly in LogiKal.

If you take the cutting lines completely into the window when selecting the position, the cuts are automatically updated.

•LogiKal Section

This function is for generating sections. Define with 2 points your section line.

•3D position LogiKal

Please note: The minimum requirement is a 3D CAD licence from LogiKal.

The command inserts a view created in LogiKal as a 3D object into your SYSCAD drawing.

•3D Export LogiKal

Please note: The minimum requirement is a 3D CAD licence from LogiKal.

The command creates a DWG with a 3D object drawn in SYSCAD from a view created in LogiKal

•LogiKal assembly list

This function  is made to insert assembly lists int a drawing.

•LogiKal job plan

This function inserts the job plan of an order into a drawing.

•LogiKal Barlist

This command inserts the list of bars of a position from LogiKal into a drawing.

•LogiKal turn view

This command is used to turn the elevation from outer view to inner view or vice versa.

•LogiKal Logout

This command is used to logout from the LogiKal - Interface. The actual position is then again available in LogiKal. The Login is done automatically from all the other commands above.

•Insert LogiKal profiles

With this command you insert a profile from LogiKal into the drawing.

•Extract Dimension from Block

Extract the dimensions from the LogiKal - sections and - elevations  . After that you could change the dimensions with SYSCAD commands to change the style etc.. The section and / or the elevation is still an intell. object which could be updated.

•Delete Dimension from Block

Delete the dimensions from the LogiKal - sections and - elevations .

The section and / or the elevation is still an intell. object which could be updated.

•LogiKal-Grid

This function is used to transfer grids, consisting of lines or bows, to the element listing of the calculation program LOGIKAL

The error message from LogiKAL must be accepted. Delete this single line in the LogiKAL - CAD and proceed.

This function is available with AutoCAD > 2013 64bit and BricsCAD.

•LogiKal-SYSCAD-Grid

This function is used to transfer grids, consisting of lines or bows, to the element listing of the calculation program LOGIKAL . You have to use the Button SYSCAD in LogiKal for that.

Important: This function is only available with AutoCAD.

For the SYSCAD elevations please use the command Centre line grid from elevation.

After that, LogiKal is getting back the control .

Please find further information about the calculation program LOGIKAL at www.orgadata-ag.de