Mounting frame facade

Select the parameters from the dialog box.

The inquiry "insertion depth (max 23.5mm <13>)" determines the shadow gap (gap width) between the frame profile and the mullion. (Gap = leg length - insertion depth)

The following message appears subsequently:

End filling < mounting frame >

Profil < 803120 >

First corner (bottom left)

or select point in closed contour

For mounting frames with different profiles the variable "profile" can be redefined.

Quit the mounting frame mode with . You remain in the program "Filling" with the following menu lines:

<RETURN> for end of filling

First corner (bottom left)

or select point in closed contour

The meaning of the terms is explained below: