Select the parameters from the dialog box.
The inquiry "insertion depth (max 23.5mm <13>)" determines the shadow gap (gap width) between the frame profile and the mullion. (Gap = leg length - insertion depth)
The following message appears subsequently:
End filling < mounting frame >
Profil < 803120 >
First corner (bottom left)
or select point in closed contour
For mounting frames with different profiles the variable "profile" can be redefined.
Quit the mounting frame mode with  . You remain in the program "Filling" with the following menu lines:
<RETURN> for end of filling
First corner (bottom left)
or select point in closed contour
|
