SYSCAD View

With this button, you get the possibility to add visual indications to your elevation. The text height follows the settings in the SYSCAD-Variable / List / View / Denomination.

These texts or symbols are assigned to the respective profile and cannot be deleted. They must be deactivated in this dialog box.

Show profile article number - shows the article number in the centre of the profile.

Show pressure cover profile number - shows the number of the pressure and cover profile for façades in the centre of the profile.

Pressure cover profile (symbol) - shows a symbol for the pressure cover profiles for façades in the centre of the profile.

Sequence number - shows the item number from the parts list in the centre of the profile.

additional visible edges Edges - shows additional visible edges in profiles. (e.g. in the STAHL/ALU/HOLZ system the visible edges of the webs on I-beams)

additional invisible edges Edges - shows additional invisible edges in profiles. (e.g. in the STAHL/ALU/HOLZ system the concealed edges of railing tubes)

Fill profiles - fills the profiles with the selected colour from the order information dialogue box .

Framing connection (designation) - shows the assignment of the framing connection by the internal database key of the respective connection.

Bolt connection (symbol) - shows the assignment of the bolt connection using a symbol at the end of the respective profile.

Additional packages - shows an icon if additional packages have been assigned.

Print/cover profile correction - shows the dimensional change of the main profiles, print and cover profiles in relation to the view.

Profile level - shows whether levels for main profiles, print and cover profiles have been created for the façade profiles by means of an icon

Plot symbols - should symbols be printed?

Plot profile labelling - should the labels be printed?