3D alignment 3 points

The Align 3D command 3 points aligns the profiles to a plane to be defined by 3 points, for this purpose the UCS does not need to be changed. The Z vector of the profile is aligned with the Z vector of the selected plane.

Example: The bottom right profile is drawn as a 3D rung. The position is to be aligned with the inclined plane.

Select the command Align 3D 3 Points :

Command:

Define plane by 3 points:

Clickfirst point 1 in the green guide plane.

Clicknext point2 in the green guide plane

Clicknext point 3 in the green guide plane

Select 3D profiles Select the profile at the bottom right

Select objects: 1 found

Select objects:

The result is shown in the right image. The bottom rung is aligned to the inclined plane.